Why should you calculate your maximum heart rate?
Heart rate-based training enables you to run at the right intensity, so you can reach your training goals. In other words, training smart is better than always training hard.
Training intensity is divided into five heart rate zones – from very light to maximum intensity. The heart rate zones are calculated as percentages of your maximum heart rate.
For example, within heart rate zone 4, you’ll be training at 81–90% of your HR max and increasing your maximum performance capacity.
To determine your personal heart rate zones, you firstly need to know or estimate your maximum heart rate.
How to estimate your maximum heart rate
Your maximum heart rate can be estimated from the commonly used formula: 220 minus your age. While a good starting point, research has shown that this formula is not perfectly accurate for everyone, especially for people who have been fit for many years or for older people.
HR MAX 220 - AGE
You can use the Maximum Heart Rate Calculator below to estimate your HR max using this method.
How to calculate maximum heart rate with a laboratory test
If you want the most accurate way of determining your maximum heart rate, you should have your HR max clinically measured. This is something you do need the fancy laboratory equipment for.
The two most common ways are the maximal treadmill and bicycle stress tests. These laboratory tests are usually supervised by a cardiologist or exercise physiologist.
How to calculate maximum heart rate with a field test
Besides estimations and tests, you can determine your maximum heart rate by putting on your running shoes, firing up your heart rate monitor and heading out into the real world.
You won’t need fancy laboratory equipment for the field test, but you’ll still get an accurate and personal estimation of your maximum heart rate. The premise is simple: you warm up properly and then do an exercise that brings you close to your maximum effort.
Please note that for a maximum effort field test it’s best to call a friend and have them join you, just to be on the safe side. Also, make sure you have some hard training under your belt from recent weeks.
Max heart rate field test example
Do this field test with a training partner. Use a heart rate monitor and note the highest heart rate you can reach. This is your maximum heart rate.
- Warm up for 15 minutes on a flat surface. Build up to your usual training pace.
- Choose a hill that will take more than 2 minutes to climb. Run up the hill once (for at least 2 minutes), building to as hard a pace as you estimate you could hold for 20 minutes. (You don’t have to keep running for 20 minutes, you just need to build up to a pace that you could hold for at least 20 minutes.) Return to the base of the hill.
- Run up the hill again with a faster pace. Get your heart going as hard as you can, building up to a pace you estimate you would be able to hold for 3 kilometres. Observe your highest heart rate on the display. Your max HR is approximately 10 beats higher than the now-noted value.
- Run back down the hill, allowing your heart rate to drop 30–40 beats per minute from where it was.
- Run up the hill once again at a pace that you can only hold for 1 minute. Try to run halfway up the hill. Observe your highest heart rate. This brings you close to your maximum heart rate. You can use this value as your max HR to set your heart rate zones. Make sure you cool down for a minimum of 10 minutes.
Doing a maximum heart rate field test while unprepared is a sure-fire way to end up in maximum distress. If you are unsure, consult your Doctor before undertaking the test.