To install drivers for your Polar IR Interface for USB port, download the following Polar USB.exe to the installation folder of Polar Precision Performance SW/ProTrainer 5 on your local hard disk drive and run the support_files/us-en/85256F470048B0BC852573CC006DA8EB/PolarUSB.exe.
Polar Precision Performance SW default installation folder is C:\Program Files\Polar\Polar Precision Performance.
ProTrainer 5 default installation folder is C:\Program Files\Polar\Polar ProTrainer.
If you are not able to download the PolarUSB.exe file, please download the following zip file instead. Use for example WinZip program to extract the zip file to above mentioned folder and run the PolarUSB.exe file.
Size: 197 Kb
If you are using Polar IR Interface for USB port you must run the PolarUSB.exe before plugging in the USB connector for the first time. The IR Interface cannot be connected to the PC during the installation. The PolarUSB.exe is executed during the installation, when installing the Polar Precision Performance SW version 3.02.007 onwards/ ProTrainer 5.
To check software version, go to software Help → About.